Applications: Dynamic applications, Process control equipment, Test and Measurement, Robitics and effectors, Laboratory and Research

　　Industries: General Industry

　　Description: The CD1095 has been designed to measure in-line torque on rotating shafts. Its sensing element is based on thin layer strain gauges in a Wheatstone bridge configuration providing excellent temperature stability. Optionally the torque sensor can receive an on-board amplifier for high level output. Intermediate ranges are available at no extra cost. Consult Measurement-Specialties’ Engineering Department if the standard options do not meet your needs or should your application require a more comprehensive measurement system. With many years of experience as a designer and manufacturer of sensors, Measurement Specialties often works with customers to design or customize sensors for specific uses and testing environments. To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.

　　Features:

　　Ranges from ±5 to ±2,500 Nm (±4 to 2,000 Lbf-ft)
　　For Dynamic Applications
　　Keyed Shaft Mechanical Connection
　　High Level Output Model with Integrated Amplifier

　　典型應用: 動態應用，過程控制設備，測試測量，機器人和終端設備，實驗室和研究

　　行業: 工業控制

　　產品描述:

　　CD1095系列扭矩傳感器主要用于轉軸扭矩的實時測量。金屬應變片組成的惠斯通電橋提供優異的溫度穩定性。另外有內置放大器的放大輸出型號可選。作為擁有多年經驗的傳感器設計和制造商，MEAS可以按要求定制適合特殊用途和測試環境的傳感器。同時，我們也根據客戶需要提供成套系統。配套元件（傳感器，電源，放大器和數顯系統）配置統一，經過校正，可供客戶立即使用。

　　特點:

　　量程：±5Nm ~ ±2500Nm（±4Lbf-ft ~ ±2000Lbf-ft）
　　動態應用
　　插銷式機械連接
　　放大輸出型可選

　　CD1095系列扭矩傳感器更多技術參數及規格書下載請瀏覽：
http://www.sensorway.cn/sensors/553.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。