Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, screw connection.
Configurable limit-value switch
Input [Ex ia] for active current signals (0.2...20 mA) or active voltage signals (0.1...10 V)
Relay output with PDT
Configuration without software via DIP switches and potentiometer
Safe 3-way electrical isolation
Power supply possible via DIN rail connector
Plug-in connection terminal blocks, with either screw or push-in connection technology
Housing width of 12.5 mm
| 屬性 | 數值 |
|---|---|
| 模塊類型 | 限值開關 |
| 輸入信號類型 | 電流,電壓 |
| 輸出信號類型 | 繼電器 |
| 電源電壓 | 24V 直流 |
| 輸入范圍 | 0.1 → 10 V, 0.18 → 21mA |
| 輸出范圍 | <lteq/>(ac) 4A, <lteq/>0.2 A @ 24 V dc |
| 危險區認證 | ATEX |
| 安裝類型 | DIN 卡軌安裝 |
| 工作溫度范圍 | -20 → +65°C |
