可齊平安裝
PNP型
NOC功能
Precisely detect and position metal objects with this inductive proximity sensor from Schmersal. Its non-contact electronic switching function means there's no bounce when switching direct current, ensuring reliable and consistent sensing. The device features integrated short circuit and current overload protection to increase safety. The nickel-plated brass housing offers resistance against corrosion, so the component is suitable for use in humid environments. As it doesn't make contact with other objects, it's less likely to be damaged by mechanical wear, ensuring long-lasting, reliable operation.
? Abrasion-resistant PVC (polyvinyl chloride) cable mantle for durability
? Meets IEC (International Electrotechnical Commission) safety standards for low-voltage switchgear
? IP67 (ingress protection) rating means it's dust-tight and water-resistant for use in demanding environments
? Automated production lines
? Hoisting and lifting
? Packaging warehouses
? Safety systems
A proximity sensor uses an oscillating circuit to generate a concentrated, high-frequency electromagnetic field. This determines the presence of ferrous metal objects. It converts a change in its oscillating amplitude into an electrical signal, which then causes the sensor to change its switching state.
| 屬性 | 數值 |
|---|---|
| 傳感器技術 | 電感性 |
| 主體樣式 | 柱體 |
| 螺紋尺寸 | M8 x 1 |
| 輸出類型 | PNP |
| 檢測范圍 | 2 mm |
| 接端類型 | 導線 |
| 電源電壓 | 10 至 30 V 直流 |
| 系列 | IFL |
| 長度 | 42mm |
| 切換頻率 | 3000 Hz |
| 最大直流電壓 | 30V |
| 安裝類型 | 嵌入式 |
| 切換電流 | 200 mA |
| 最高開關頻率 | 3kHz |
| 最高工作溫度 | +70°C |
| 外殼材料 | 黃銅 |
